Recent Changes - Search:

The Planck HFI Instrument Developement Team

back to home page

HFI instrument architecture and early design

  • Jean-Michel Lamarre: HFI instrument scientist, Instrument architecture, Instrument Working Group coordination
  • François Bouchet: Scientific requirements
  • Richard Gispert: Scientific requirements
  • Andrew Lange: US Deputy Instrument Scientist, Bolometer specification / scientific optimization
  • Jacques Charra: instrument project manager
  • Guy Guyot: system engineer
  • James Bock: Bolometer design and specification
  • Ravinder Bhatia: Bolometer housing design
  • Bill Jones: Polarization sensitive bolometers
  • Peter Ade: UK Deputy Instrument Scientist, Focal optics concept ; interference filters
  • Sarah Church: Back to back horn demonstration
  • Anthony Murphy: Corrugated horn principles
  • Bruno Maffei: Corrugated horns design and tests
  • Yuying Longval:Optical models and focal plane layout
  • Alain Benoît: Dilution cooler architect/ Readout electronics principles
  • Philippe Camus: Dilution cooler development
  • Adriana Sirbi: Dilution cooler early design
  • Maryse Charra: 4K/0.1K demonstrator
  • Jean-Pierre Torre: thermometry / Low temperature measurements
  • Michel Piat: System issues: Readout electronics ; Thermometers -100 mK stability
  • Dominique Yvon: Wires and harness design ;Electromagnetic interference and compatibility
  • Henri Lagardère:FPU early mechanical concept
  • Jean-Jacques Fourmond: Mechanical engineer / 4K/0.1K demonstrator manager
  • Antoine Arondel: mechanical early designer
  • Jean-Paul Chabaud: readout electronics principles
  • Siegfried Gaertner: readout electronics principles
  • Paolo de Bernardis: JFET stage architect
  • Thomas Bradshaw: 4K cooler scientist and manager
  • Martin Crook: 4K cooler demonstration
  • Jean-Luc Beney: On-board processing unit

HFI instrument building

  • Jean-Michel Lamarre: HFI instrument scientist (Planck Science Team member)
  • Andrew Lange: US Deputy Instrument Scientist
  • Peter Ade: UK Deputy Instrument Scientist
  • Jacques Charra: former instrument project manager
  • Guy Guyot: former instrument project manager

Bolometers

  • James Bock
  • Bill Jones: detector design and early device testing, science analysis
  • Brendan Crill: detector and science analysis
  • Warren Holmes: detector testing, flight I and T, post delivery management
  • Chris Paine: flight testbed set up, bolometer engineering model testing
  • Tim Koch: bolometer build manager
  • Debi Romero: module build, main technician
  • Tran Ngo-Luu: module build technician
  • Jerry Mulder: thermistor attachment and die handling
  • Angela Ngyuen: Quality Assurance
  • Anarosa Villanueva: module hybridization lead engineer
  • Toshiro Hatake: module hybridization engineer
  • Ravinder Bhatia: bolometer module design engineer/post doc.
  • Larry Wild: microdevices engineer
  • Minhee Yun: microdevices lead engineer
  • Hyung Cho: test engineer
  • Charles Hays: test engineer
  • Adam Woodcraft: Subsystem detector testing
  • Rashmi Sudiwala: System integration & testing - Flight calibration & trouble-shooter

JFET box

  • Paolo de Bernardis: Coordinator
  • Daniele Brienza: Electrical Design and Test
  • Fabio Era (Galileo Avionica): Industrial Project Manager
  • Maria Cristina Falvella (Agenzia Spaziale Italiana): Project Management
  • Armando Iacoangeli: Machining and Tests
  • Silvia Masi: Thermal Design and Tests
  • Stefano Malatesti (Galileo Avionica): Electronic Design and Qualification Tests
  • Federico Nati: Prototyping and Tests
  • Francesco Piacentini: Tests
  • Gianluca Polenta: Tests

REU and PAU

  • Roger Pons: Project manager
  • Jacques Narbonne: Electronics architect
  • Damien Rambaud: Digital electronics
  • Christophe Marty: AIV/AIT
  • Michel Nexon: Mechanical
  • Jacques Landé: Analog electronics
  • Wilfried Marty: On board and EGSE softwares
  • Jean-Michel Glorian: EGSE softwares
  • Ludovic Montier: scientific responsible of the calibration
  • Martin Giard: scientific manager
  • Jean-Philippe Bernard: Scientist
  • Isabelle Ristorcelli: Scientist
  • Etienne Pointecouteau: Scientist
  • Jeremy Dalle: calibration
  • Julien Delmas: EGSE developer

DPU

  • Jean Luc Béney: project manager
  • Julien Bonis: vibration and thermal simulations and tests
  • Michel Bouchel: FPGA design
  • Richard Cizeron: Mechanics manager
  • François Couchot: scientist, project coordinator
  • Michel Dehamme: on board software
  • Claude Eder: electronics design and tests
  • Alain Heurtel: quality
  • Bruno Mansoux: on board software manager
  • Jean-Claude Marrucho: interfaces software
  • Eric Plaige: electronics design and tests
  • Stéphane Plaszczynski: scientist, compression algorithm
  • Monique Taurigna: commanding software

4K cooler

  • Thomas Bradshaw: Project manager and scientist
  • Martin Crook: Deputy project manager and scientist
  • Roger Emery: Scientist
  • Matthew Hills: Engineer
  • Chris Stephens: Engineer
  • Chris Nelson: Engineer
  • Geoff Brown: Technical support
  • Jenny Davenne: Technical support
  • Chris Pulker: Technical support
  • John Firth: Electronics design
  • Ron Cutler: Electronics design
  • Alan Pearce: Electronics design
  • Nigel Wright: Systems Engineering and Assessment: Project manager
  • Scott Mitchell: Systems Engineering and Assessment: Systems Engineer
  • Ray Carvell (Brightwell Engineering): H-P Programme manager
  • Mike Brownhill (EADS Astrium): Astrium project manager
  • Eduardo Battaner : 4K Charge Regulator Unit project manager

Dilution cooler

  • Guy Guyot: dilution cooler
  • Eric Lagorio: functional tests of the dilution cooler electronics
  • Christophe Vescovi: technical coordinator of the dilution cooler electronics
  • Olivier Zimmermann: AIT dilution cooler electronics
  • Emmanuelle Vernay: dilution cooler electronics product assurance manager
  • Philippe Camus: dilution cooler technical manager
  • Maryse Charra: dilution cooler AIT manager
  • Mireille Chaigneau: electronic packaging, harnesses
  • Bruno Crane: dilution cooler AIT mechanics
  • François Langlet: cryogenic components testing
  • Vincent Heckenauer: dilution cooler AIT pneumatics
  • Sebastien Triqueneaux (société Air Liquide): dilution cooler subcontractor manager
  • Louis Sentis (société Air Liquide): dilution cooler former subcontractor manager
  • Lionel Meslier (société BTS): product assurance manager
  • Francis Vezzu: mechanical design, vibration tests of the dilution cooler electronics
  • Olivier Bourrion: digital design of the dilution cooler electronics

Sorption cooler electronics

  • Patrick Stassi: Technical coordinator of the Sorption Cooler Electronics
  • Christophe Vescovi: Technical coordinator of the analogical part of the SCE
  • Fabrice Pancher: software for controlling and monitoring the SCE
  • Frédéric Melot: SCOS2K interface of the SCE
  • Joel Bouvier: digital part of the SCE
  • Olivier Zimmermann: test of the software of the SCE
  • Eric Lagorio: functional tests of the SCE
  • Georges Barbier: software development for controlling and monitoring the SCE

Cold optics (horns, filters)

  • Peter Ade
  • Bruno Maffei: horn optics
  • Carole Tucker: Filter manufacture & testing
  • Peter Ade: UK Instrument Scientist - Optical design/integration verification & calibration
  • Giorgio Savini: Optical testing & Calibration

Design cryo and 01-4K demonstrator

  • Jean-Michel Lamarre: Scientific coordination
  • Antoine Arondel: mechanical designer
  • Bruno Crane: assembly integration and testing
  • Maryse Charra: system engineering, testing and validation
  • Cydalise Dumesnil: mechanical simulations
  • Jean-Jacques Fourmond: thermal aspects and management
  • Alain Benoit
  • Philippe Camus
  • JC. Vallier
  • Tom Bradshaw: project manager
  • Martin Crook: electronics and cryo testing
  • Ravinder Bhatia: Bolometer design & thermometer testing

Symbol

  • Bernadette Leriche: project manager
  • Jean-Michel Lamarre: Scientific coordination
  • Jean-Pierre Crussaire: mechanical studies
  • Michel Piat: measures and data analysis
  • Philippe Granier: measures and data analysis
  • François Langlet: cryogenics
  • Alain Benoît: 100mK dilution design

Focal Plane Unit mechanical design

  • Antoine Arondel: mechanical designer on FPU and cooler interfaces
  • Mehdi Bouzit: mechanical designer on electronic interfaces with spacecraft
  • Cydalise Dumesnil: mechanical architecture, simulations and mechanical system tests
  • Jean-Jacques Fourmond: thermal design and architecture management, 4K cooler activities
  • Gilles Morinaud: mechanical designer for structural and thermal components
  • Fred Gannaway: Mechanical Engineer - focal plane design

Optics

  • Jean-Michel Lamarre: supervision
  • Peter Ade: Optical design/integration verification & calibration
  • Giorgio Savini: Optics spectral testing
  • Bruno Maffei: Horn models, design and tests. Optical chain design and test.
  • Anthony Murphy: corrugated horn theory (single mode and multimoded)
  • Tully Peacocke: multimoded horn theory
  • Isabelle Ristorcelli: HFI requirements for telescope design and testing
  • Julien Brossard: early beam modelling with GRASP
  • Vladimir Yurchenko: modelling of the beams with physical optics. Simplified models.
  • Fabio Noviello: Physical optics models with realistic telescope.
  • Yuying Longval: Focal plane design with classical optics models.
  • Richard Wylde (Thomas Keating Ltd): corrugated horn fabrication.

Optical design

  • Jean-Michel Lamarre
  • Peter Ade: UK Instrument Scientist - Optical design/integration verification & calibration

HFI AIT/AIV calibration

  • Pascal Eng: former AIT/AIV manager
  • Thierry Maciaszek: AIT/AIV manager
  • François Pajot: calibration scientist
  • Maryse Charra: Deputy AIT/AIV manager
  • Cydalise Dumesnil: AIT/AIV Mechanical Manager
  • Véronique Hervier: AIT/AIV Control&Command manager
  • Antoine Arondel: AIT/AIV Mechanical Engineer
  • Mehdi Bouzit: AIT/AIV Mechanical Operator
  • Vincent Heckenauer: AIT/AIV Electrical Integration Operator
  • Stéphane Tosti: AIT/AIV Electrical Integration Operator
  • Bruno Crane: AIT/AIV Mechanical&Pneumatic Operator
  • Claude Mercier: HFI Real-time data analysis SW Manager
  • Karin Dassas: HFI Real-time data analysis SW Engineer

Focal Plane Unit plates integration

  • Bruno Maffei: horn optics
  • Peter Ade: UK Instrument Scientist - Optical design/integration verification & calibration
  • Rashmi Sudiwala: System integration & testing - Flight calibration & trouble-shooter
  • Giorgio Savini: Optical testing & Calibration
  • Maryse Charra: FPU AIT manager
  • Bruno Crâne:assembly & integration
  • Antoine Arondel: assembly & integration
  • Mireille Chaigneau: electronic packaging and harnesses
  • Vincent Heckenauer: electrical integration
  • Stéphane Tosti: electrical integration

Focal Plane Unit calibration

  • François Pajot: Calibration scientist
  • Adam Woodcraft: Subsystem detector testing
  • Bruno Maffei: horn optics
  • Peter Ade: UK Instrument Scientist - Optical design/integration verification & calibration
  • Rashmi Sudiwala: System integration & testing - Flight calibration & trouble-shooter
  • Giorgio Savini: Optical testing & Calibration
  • Eric Bréelle: Saturne cryostat setup and operations
  • Dominique Broszkiewicz: Saturne cryostat integration and operations
  • Charles Carabétian: calibration engineer
  • Andrea Catalano: response caracterization processing/ Coupling with cryo stages / Linearity / Time response / Optimization of bias current.
  • André Chardin: calibration project manager
  • Richard Cizeron: calibration carbon fiber sources design
  • Francois Couchot: calibration carbon fiber sources operation
  • Alain Coulais: time response and responsivity processing
  • Brendan Crill: responsivity processing
  • Josette Daubin: Saturne automation programming
  • Pierre de Marcillac: calibration etalon bolometer
  • Jean-Marc Delouis: calibration database fireman
  • Francois-Xavier Désert: noise processing
  • Philippe Duret: FTS spectrometer setup
  • Corinne Evesque: FTS software and operation
  • Serge François: Saturne cryostat setup and operations
  • Yannick Giraud-Héraud: instrumented wheel operations
  • Laurent Guglielmi: calibration control and command software manager
  • Jacques Haissinski: calibration operations
  • Sophie Henrot-Versillé: calibration carbon fiber sources operation,
  • Warren Holmes: bolometer caracterisation
  • William Jones: calibration operations and data analysis
  • Jean-Michel Lamarre: detector settings
  • Paul Lami: Saturne cryostat architect and manager
  • Michel Lefebvre: Saturne cryostat integration and operations
  • Christophe Leroy: calibration thermal test operations
  • Ayanthan Mahendran: calibration sources control programming
  • Bruno Mansoux: satellite interface simulator
  • Christine Nicolas: Saturne cryostat integration and operations
  • Olivier Perdereau: calibration carbon fiber operations, calibration data timing
  • Francesco Piacentini: calibration operations and data analysis
  • Michel Piat: thermal regulation calibration
  • Bruno Quenez: Coupling with cryo stages / research for optical leakages.
  • Damien Rambaud: calibration etalon bolometer data acquisition
  • Jean-Claude Renault: calibration setup design and integration
  • Cyrille Rioux: calibration source developpement and caracterisation
  • Cyrille Rosset: calibration polarizer setupe and operation
  • Jean-Pierre Torre: calibration etalon bolometer 300mK cooling system
  • Dominique Vallée: calibration control and command software developper
  • Maryse Charra: AIT & HFI cryogenic operations
  • Philippe Camus: HFI cryogenic operations
  • Bruno Crâne: AIT& HFI cryogenic operations
  • Guy Guyot: HFI cryogenic operations

System integration (Cannes)

  • Pascal Eng: former AIT/AIV manager
  • Thierry Maciaszek: AIT/AIV manager
  • Maryse Charra: Deputy AIT/AIV manager
  • Cydalise Dumesnil: AIT/AIV Mechanical Manager
  • Véronique Hervier: AIT/AIV Control&Command manager
  • Mireille Chaigneau: electronic packaging and harnesses
  • Antoine Arondel: AIT/AIV Mechanical Engineer
  • Mehdi Bouzit: AIT/AIV Mechanical Operator
  • Vincent Heckenauer: IT/AIV Electrical Integration Operator
  • Stéphane Tosti: AIT/AIV Electrical Integration Operator
  • Bruno Crane: AIT/AIV Mechanical&Pneumatic Operator
  • Claude Mercier: HFI Real-time data analysis SW Manager
  • Karin Dassas: HFI Real-time data analysis SW Engineer
  • Vincent Buttice: HFI Real-time data analysis SW Engineer
  • Patrick Bravais: (Société Air Liquide)Pneumatic support
  • Dominique Chazot: (Société Air Liquide)Pneumatic support
  • Tom Bradshaw: 4K cooler support
  • Martin Crook: 4K cooler support
  • Jenny Davenne: 4K cooler support
  • Geoff Brown: 4K cooler support

Tests at Centre Spatial de Liege

  • Rashmi Sudiwala: System integration & testing - Flight calibration & trouble-shooter
  • Thierry Maciaszek: AIT/AIV manager / control & command
  • Maryse Charra: Deputy AIT/AIV manager / cryogenics & pneumatics
  • Guy Guyot: cryogenics & pneumatics
  • Philippe Camus: dilution cooler
  • Véronique Hervier: Control & Command
  • Mireille Chaigneau: harnesses
  • Vincent Heckenauer: pneumatic support
  • Bruno Crane: Mechanical&Pneumatic support
  • Claude Mercier: HFI Real-time data analysis support
  • Karin Dassas: HFI Real-time data analysis support
  • Vincent Buttice: HFI Real-time data analysis support
  • Patrick Bravais: (Société Air Liquide)Pneumatic support
  • Dominique Chazot: (Société Air Liquide)Pneumatic support
  • Jean-Jacques Fourmond: Thermal aspect & 4K cooler support

Prelaunch campaign

  • Maryse Charra : Manager
  • Thierry Maciaszek: Instrument electrical testing
  • Claude Mercier: HFI Real-time data analysis support
  • Vincent Heckenauer: pneumatic Operator
  • Bruno Crane: Pneumatic Operator & launch configuration
  • Patrick Bravais: (Société Air Liquide)Pneumatic support
  • Dominique Chazot: (Société Air Liquide)Pneumatic support
Edit - History - Print - Recent Changes - Search
Page last modified on January 30, 2015, at 04:03 PM